Master Touch 15.6 Inch Interactive Touch Screen Panel Passing Reliability Test
1. Product Description
MST G+G Pcap (projected capacitive) touch panel, via a process of sputtering an ITO pattern on a glass substrate to make a G-sensor, then laminate 2 layers of glass together, perceive touch accurately via capacitance coupling.
Capacitive touch screen has following outstanding features:
- Response speed fast, smooth touch
- Flat panel, more high-end atmosphere, eliminating infrared touch screen surface with a groove edges are not allowed to shortcomings
- Any point can withstand more than 50 million times touch
- Operating systems strong compatibility
- Intelligent automatic calibration, use forinternal / external variety of environment
- Long life, low maintenance costs
2. Advantages of G+G Structure
(1) High transmittance,>85%.
(2) Hard and anti-wear surface.The hardness is 6H.
(3) Excellent corrosion resistance.
(4) Sensitive touch and stable performance.
3. Basic Features
| Item | Feature | Remarks |
| Controller | ILI2510 | - |
| Channel | TX: 40 RX: 52 | - |
| Power | 5V | USB: 4.7V ~ 6.0V, Typical:5V |
| Communication | USB | USB: 2.0 Full Speed |
| Number of Touch point | 10 | - |
| O.S. | Windows/ Android/ Linux | plug and play |
| Power Consumption | 1.Active Mode: Max.120mA @ USB Input 5V 2.Idle Mode: 90mA @ USB Input 5V 3.Sleep Mode: less than 1mA @ USB Input 5V |
4. Mechanical Characteristics
| Item | Specification | Unit |
| Viewing Area | 345.2(L)×194.6(W) | mm |
| Cover Lense O.D. | 383.2(L)×232.6(W) |
5. Optical Characteristics
| Item | Specification |
| Transparency | Viewing Area | ≧85% |
6. Sensor Specification
| Item | Specification | Unit |
| Stacked structure | Cover | 3.0 | mm |
| LOCA | 0.2 | mm |
| ITO | 0.7 | mm |
| Sensor Glass |
| ITO |
| Sensor Dimension | OD Size | X | 358 | mm |
| Y | 210 | mm |
7. Drawing
8. Details
9. Reliablility Test
| Reliability test report |
Objects
| □Raw material □New production process □Abnormal item
□New product □Finished product □Sample
□Experiment procedure and method □Others
□Production line program |
| Purpose: to verify the applicability of the experimental product when being stored,transported and used under the extreme environmental conditions. |
| Experiment requirements:
①Before the experiment, make sure the functions of the product must be good,while the cosmetic may be good or non-good according to the purpose of the experiment.
②If it is necessary to do the experiment again,make sure all materials must be put in the same room for at least 2hrs and make sure that there is no water vapor on its surface.
③It is prohibited to open the door before we finish the whole experiment.
④The product is requested to be kept for more than 1 years,after the experiment.
|
| No. | Items | Test condition | Criterion |
| 1 | High temperature and humidity test | 1. Temperature: 60℃
2. Humidity: 90%RH
3. Time: finished product 120H | Appearance test refer tostandard OK Function detection OK |
| 2 | Temperature Switching impact test | 1.High temperature
2.Low temperature
3. 30 times in cycle | Appearance test refer tostandard OK
Function detection OK |
| 3 | Salt spray test | 1.Concentration: 5% NaCl solution
2.Temperature: 35℃
3.Time: finished product 48H | Appearance test refer tostandard OK
Function detection OK |
| 4 | High temperature storage test | 1.Temperature: 80℃
2.Time: 120H | Appearance test refer tostandard OK
Function detection OK |
| 5 | Low temperature storage test | 1.Temperature: -30℃
2.Time: 120H | Appearance test refer tostandard OK
Function detection OK |
| 6 | Red ink test | 1. Room temperature
2. Time: 8H | 1. No ink infiltration
2. All functions are good |
| 7 | Hand sweat test | 1. Sweat PH=4.7
2. Time: 48H | Appearance test refer tostandard OK
Function detection OK |
| 8 | Static electricity test | 1. Air discharge: 8KV
2. Contact discharge: 6KV
3.Times: 10 times for each point | Appearance test refer tostandard OK
Function detection OK |
10. FAQ
Product Tags:
|
|
345.2x194.6mm 15.6'' Interactive Touch Screen Panel With ILI2510 Controller Images
|
